EV Charger Not Working: What to Check First
Most issues are simple to resolve and do not indicate a fault with the charger.
If your EV charger is not working, the issue is often straightforward and can usually be resolved with a few quick checks. In many cases, the charger itself is operating correctly and is responding to settings, power availability, or connectivity.
Start by checking whether there is power to the charger. Look for indicator lights or signs that the unit is receiving electricity. If the charger appears completely inactive, check the fuse board to see whether any breakers have tripped.
Next, check whether charging has been scheduled rather than starting immediately. Many chargers are set to operate only during off-peak or night-rate hours. If charging is scheduled, the charger may appear idle until the set time.
Make sure the charging cable is fully connected at both ends. The connector should click securely into the car. If the cable is not locked in place, charging will not begin.
If your charger uses an app, open it and check for any alerts or messages. Connectivity issues can sometimes prevent charging from starting, even though the hardware is working.
Finally, try unplugging the cable from both the charger and the car, wait a few seconds, and reconnect. This can reset the connection and allow charging to begin.
If charging still does not start after these checks, the issue may require further investigation, but most problems are resolved at this stage.